New windows and doors improve comfort, cut energy bills and add long-term value to your home. Westlight Windows Orange County pairs proven product lines with our own installing crews for lasting performance - and a price we put in writing.
Choose your installer
The unit is half the job - the install is the other half. Our own background-checked crews measure, set, seal and insulate every opening, and they know the lines we quote inside and out because they install them every week.
Select the right products
Compare styles, materials and glass packages side by side until the fit is right for your rooms, your budget and your goals. The product-line comparison below is the place to start.
Prepare your home for install
Before install day we walk you through a short checklist - furniture pulled back, treatments down, a clear path to each opening - so install day is watch-it-happen, not scramble.
Compare the Lines We Quote
Every project is priced on the same lines, side by side - the price indicators below are relative, and your consultant shows exact numbers on your actual openings.
PGTThe line homeowners arrive naming - the most impact certifications in the industry$$$
- More impact certifications than any other line we quote
- WinGuard, EnergyVue and ClassicVue Max systems built for every wind zone
- 99% on-time delivery keeps your install date on the calendar
CGIThe heavyweight impact line$$$$$
- Large-missile impact ratings for the strictest wind zones
- Architectural-grade aluminum with commercial-depth frames
- The line we quote when protection is the whole point
CWSThe value pick$$
- Vinyl systems built to strict wind codes
- Strong energy packages at the friendliest price point
- The smart start for whole-home replacements on a budget
ESWSlim lines, big glass$$$$
- Narrow-sightline aluminum for modern elevations
- Oversized openings and floor-to-ceiling glass
- Impact-rated without the bunker look
ECOThe aluminum impact workhorse$$$
- Factory-built aluminum impact systems
- A strong price-to-protection ratio for coastal homes
- Proven inventory lines with short lead times
Why Orange County Homeowners Choose Mr-Glass Windows & Doors
Westlight Windows Orange County provides independent Mr-Glass Windows & Doors in Orange County, CA repair, service, and installation across Orange County, from the beach cottages of Huntington Beach to the hillside homes of Anaheim Hills. We are not a Mr-Glass dealer and we are not authorized by the manufacturer. What we are is the crew that has rebuilt enough Mr-Glass sashes, rollers, and multi-point locks across Orange County to know exactly which series develop play in the tracks and which corner welds fail first. If you own Mr-Glass windows and doors and they are binding, sagging, fogging, or refusing to lock square, call (424) 414-2048 and we will walk you through what you are likely dealing with before you spend a dime.
Why Trust Westlight Windows Orange County for Your Mr-Glass Windows & Doors?
Owen Satterfield, the owner of Westlight Windows Orange County, has spent the better part of two decades measuring, fitting, and finishing windows and doors across Southern California. He grew up in the San Gabriel Valley watching his father rehab old houses, and the lesson that stuck was simple: a window either keeps the weather out or it doesn’t. There’s no halfway. That is the standard our technicians bring to every Mr-Glass job, whether it’s a seized 8700 Series horizontal roller in Costa Mesa or a failed multi-point lock on a Irvine Mr Glass service entry door.
Our techs have rebuilt and re-glazed enough Mr-Glass sashes, rollers, and multi-point locks across Orange County to know which series develop play in the tracks and which corner welds fail first. We rely on that hands-on repair history, not manufacturer certification, to deliver fixes that last for Mr-Glass windows and doors. Every job gets a written price before any work starts, a committed arrival window, and the Kingswell Guarantee in writing when we finish. If something we fix fails within the guarantee period, we come back and correct it at no charge. No negotiating required.
Common Mr-Glass Windows & Doors Problems We Fix in Orange County
These are the Mr-Glass failure patterns we see most often in Orange County. If your issue is on this list, you are not imagining it, and it is fixable.
- Sagging or derailed rollers on 8700 and 9700 Series sliders. The heavy 3-lite panels on Mr-Glass 9700 Series sliders put serious load on the original nylon rollers. Near the coast, salt-laden air accelerates the wear, and once a roller flattens, the panel jumps the track or grinds against it. We replace all six rollers on a 3-panel slider at once, because doing two now and four in a year is a waste of your money.
- Corner weld splits at the sash corners on 7600 Series single hungs. Years of thermal cycling, with Orange County’s heat in the day and cooler nights, stress the welded corners. When a weld splits, the sash loses its rigidity and the glass eventually takes the strain. We can reinforce many of these corners, but we will also tell you honestly when the frame has reached the end of its service life.
- Stripped or loosened multi-point lock keepers and strike plates on Mr-Glass French and entry door sets. A multi-point lock only works when every keeper lines up with its strike plate. Foundation settling, which is common in older Orange County neighborhoods, can throw a door out of alignment by a fraction of an inch, enough to make the lock bind or fail to throw the bolts.
- Hardened or torn weatherstripping and worn pivot shoes causing sashes to bind or fall on 7600 double hungs. The pivot shoe is the little part that lets a double hung tilt for cleaning. When it wears out or breaks, the sash drops hard or refuses to stay up. We see this regularly in mid-century ranch homes across Orange County that still have their original Mr-Glass installation.
- Fogged dual-pane glass on Mr-Glass units installed 15-plus years ago. The seal between the two panes fails, moisture gets in, and the glass fogs permanently. This is not a cleaning problem. It’s a seal failure, and the fix is new insulated glass or a replacement sash.
Last week our crew pulled a Mr-Glass 9700 three-panel slider in a Laguna Niguel condo where the center panel kept jumping the track. The original nylon rollers had flattened, so we replaced all six with aftermarket stainless-ball-bearing rollers, re-shimmed the bottom track, and adjusted the anti-lift blocks. The panel now glides with two fingers and locks square.
Mr-Glass Parts and Our Repair-vs-Replace Approach
We install OEM Mr-Glass balances, rollers, and lock hardware whenever they are still available. When a series is discontinued and OEM parts are backordered or priced far beyond what the repair justifies, we switch to proven aftermarket equivalents that match or exceed the original spec. For 8700 and 9700 sliders, that often means stainless-ball-bearing rollers instead of the original nylon. For older 7600 double hungs, it means replacing the pivot shoes and balances in pairs to keep the sash operating evenly.
The honest repair-vs-replace call matters more than the parts. If a Mr-Glass frame is rotted, severely out of square, or the glass seal has failed on multiple lites, we tell you straight and quote a replacement insert or full-frame instead of patching. Patching a failing frame costs you more over three years than replacing it once. We would rather tell you that before you spend money with us on the wrong approach. Call (424) 414-2048 and we will give you a straight read over the phone, then back it with a written estimate if a visit makes sense.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We confirm which Mr-Glass series you have, identify the failure mode, and check related hardware so we don’t fix one symptom and leave another one waiting. For a binding 8700 horizontal roller, that means checking the track alignment, the anti-lift blocks, and the locking hardware, not just swapping rollers.
- 2
Repair or replacement quote. You get a written price before any work starts. The quote lists every part, every labor step, and the warranty on the work. No revised invoices at the door.
- 3
Repair or install. Our uniformed, background-checked technicians do the work using OEM Mr-Glass parts where available and proven aftermarket equivalents where they are not. We show up in the window we gave you.
- 4
Testing. We cycle the sash or door repeatedly. We operate the lock. We check the weatherstripping seal. If it doesn’t operate like it should, we’re not done.
- 5
Written guarantee. Every completed job comes with the Kingswell Guarantee in writing and the 365-Day Done Right Promise. If what we fixed fails within the guarantee period, we return and correct it at no charge.
Mr-Glass Products We Service & Install in Orange County
Our Orange County crews service and install the Mr-Glass series most common in this market: the 7600 Series single hung, the 8700 Series horizontal roller, the 6800 Series casement, and the 9700 Series 3-panel sliding door, also called a 3-lite roller. We also handle our Window Replacement services into existing Mr-Glass frames when the frame is still square and sound, and full-frame replacement when it is not. We keep the most commonly needed Mr-Glass rollers, pivot shoes, and balances in local stock so we are not waiting on a warehouse across the country while your window sits open.
We Also Service These Brands
Mr-Glass is one of eight manufacturer lines we service and install in Orange County, including PGT, CGI, CWS, ES Windows, ECO Window Systems, Therma-Tru, and ViewLux. That matters because we recommend the right product for the job rather than forcing your home to fit one brand. If a discontinued Mr-Glass series is no longer practical to repair, we can match you to a current line without switching companies.
FAQs – Mr-Glass Windows & Doors Service in Orange County
You can replace just the rollers in most cases, and that’s the right first move. A Mr-Glass 8700 with a grinding or dragging panel almost always has flattened nylon rollers. We replace all four rollers on a 2-panel slider at once, adjust the track, and test the operation. A new sash is only warranted when the frame itself is bent, cracked, or the glass seal has failed. Call (424) 414-2048 and describe the sound it makes when you slide it. We’ll tell you what you’re probably looking at.
The balance system inside the jamb has failed. Mr-Glass 7600 single hungs use a spring or block-and-tackle balance to counterweight the sash. When the balance loses tension or a pivot shoe snaps, the sash drops hard. That hard drop can crack the corner welds over time, so this is a repair worth doing promptly. We replace balances in pairs and test the sash travel before we leave.
It depends on how far the crack has gone. A hairline split at the sash corner can often be cleaned, reinforced, and re-welded, extending the sash’s life for years. A full separation, or a crack that has let moisture into the frame, usually signals that the sash is done. We will inspect the weld and give you an honest recommendation, not a patch job that fails in a season.
Usually not. On Mr-Glass 9700 3-panel sliders, the track is rarely the problem. The flattened rollers are. Once the rollers wear down, the full weight of the panel drags on the track instead of rolling over it. Replacing the rollers and re-shimming the track restores the glide in most cases. If the track itself is pitted or warped, we will tell you and quote an honest track replacement or frame repair. A good first step is calling (424) 414-2048 with the model and panel size so we can give you a realistic range before the visit.
In most cases, no. A fixed Mr-Glass picture window has a stationary glazing system and no operable sash hardware built into the frame. Converting it to an operable window means replacing the entire unit with a Mr-Glass 6800 casement or 7600 single hung, or another line if Mr-Glass no longer makes the size you need. We will measure it, quote the full replacement honestly, and explain the opening work involved before you commit.
For most Mr-Glass repairs in Orange County, roller replacement on an 8700 or 9700 slider typically runs $180 to $340, balance and pivot shoe replacement on a 7600 single or double hung typically runs $200 to $380, and a multi-point lock adjustment or keeper replacement on a Mr-Glass door typically runs $150 to $300. Full insert window replacement runs higher, typically $700 to $1,200 per opening depending on size and glass package, and full-frame replacement runs more. Every quote is written before work starts, so the number you see is the number you pay. Call (424) 414-2048 for an exact quote. Estimates are free.
Book Your Mr-Glass Service in Orange County, CA
If your Mr-Glass windows or doors are binding, sagging, fogging, or refusing to lock, call Westlight Windows Orange County at (424) 414-2048. We will answer the phone, ask the right questions, and schedule a free estimate with a written price before any work begins. Owen Satterfield’s rule is simple: if he wouldn’t put it on his own house, he’s not putting it on yours.
Written by Owen Satterfield, Owner at Westlight Windows Orange County, serving Orange County since 2009.
Six Reasons Homeowners Choose Westlight Windows Orange County
Laminated glass and reinforced frames hold up to wind-driven rain, hail and flying debris, so your openings stay sealed when the weather turns.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Tighter seals and insulated glass even out hot and cold rooms and stop the drafts at the frame.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.